[texpoint-users] Inexistent display

[TexPoint]

Hi,
 
   I have seen the problem only once before. The display was created but it
was using the wrong magnification value and was very small. You can test if
that is the case by dragging with the mouse a selection frame on the whole
slide, and watch for the selection handles appearing. In my case, it
happened because the value of the global parameter called magnification was
0!
 
   If this is not the problem, please send a one slide presentation with the
problem and the output of TexPoint/Configure/Information (after you update
to 2.9.1). 
 
George.


  _____  

From: users-bounces at lists.texpoint.necula.org
[mailto:users-bounces at lists.texpoint.necula.org] On Behalf Of Mihai Anitescu
Sent: Saturday, May 06, 2006 12:57 PM
To: users at lists.texpoint.necula.org
Cc: 'anitescu'
Subject: [texpoint-users] Inexistent display



Hi all,

 

I have the following problem with Texpoint 2003 and Office 2003 (and I had
it with TexPoint 2002 and Office 2002). I used the 2.8.1. version in both
cases. 

 

After I create my first equation, (sometimes after the second one) I get to
a stage where, everything seems to work fine, but no display is created
after I press create bitmap. The latex log is attached in pdf (since I
cannot copy paste) and shows no error as far as I can tell. I have dumped
the TP_tmp files and they look fine (ps and png). 

 

With debug level one, I get the following error message (attached in pdf )
as well "failed to read file c:\Program Files\TexPoint\", but everything
seems to run fine. 

 

I have tried the "empty display" FAQ suggestions to no avail. Bear in mind
that TexPoint works with my first display (in case you wonder about
permission to read of the TexPoint install dir), it starts to have problem
starting with the second. I have tried to save in between, etc. to no avail.


 

Let me know if you have any ideas 

 

Mihai

 

Mihai Anitescu, Computer Scientist

Mathematics and Computer Science Division

Argonne National Laboratory

9700 S Cass Avenue

Argonne, IL 60439

Voice: 630 252 4172

Fax: 630 252 5986

email: anitescu at mcs.anl.gov 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.texpoint.necula.org/pipermail/users-texpoint.necula.org/attachments/20060508/23e98e51/attachment-0003.htm>